Free readiness test · CCNA 200-301 v2.0

Are you ready for the CCNA? Free 10-question readiness test

Answer 10 multiple-choice questions from the course. It takes about 5 minutes. At the end, type your name and email and we show you your score, your level and the topics worth strengthening. We also email it to you.

  • 📝 10 questions
  • ⏱️ About 5 minutes
  • 🎁 Free
  • 📧 Result on screen and by email
1. In a data center, every switch where servers connect links to every switch in the upper tier, and no switch links to another switch in its own tier. Which architecture is this?
2. A PC at 192.168.5.20/24 reaches the other PCs on its network, but no server on another network. Its ipconfig shows nothing under Default Gateway. What do you fix?
3. A technician typed "ipv6 address 2001:db8:cafe:2::1/64" on an interface and, to fix it, "ipv6 address 2001:db8:cafe:20::1/64". What does the interface have now?
4. On a Catalyst 3560, "switchport mode trunk" returns "Command rejected: An interface whose trunk encapsulation is "Auto" can not be configured to "trunk" mode". What is missing?
5. On SW2 the channel is in mode on, and on the other switch it is in mode active. After SW2 is changed, the channel forms with LACP. Which sequence did the technician most likely use on SW2's range of members?
6. On R2, "show running-config | include ip route" shows "ip route 192.168.10.0 255.255.255.0 10.0.21.1", but that route doesn't appear in show ip route. What is the most likely cause?
7. Two routers run HSRP on the same LAN, but both show State Active. One has "standby 1 ip 192.168.10.1" and the other has "standby 10 ip 192.168.10.1". What is the cause?
8. "ip access-group SALES-IN in" was applied on G0/0, but show access-lists only shows an ACL named SALES_IN (with an underscore). What happens to traffic entering G0/0?
9. R1 does PAT for the whole office with the NAT ACL and has a VPN to Cartago. The "show crypto ipsec sa" counters do not go up even though Sales is sending traffic to Cartago. What is missing?
10. A port with port security is in err-disabled because the printer was replaced. The technician runs shutdown and no shutdown, and the port goes down again. What did they miss?

What this test measures

The 10 questions come from the course «CCNA in 30 Days: Prepare for the 200-301 v2.0»: one per topic, from different parts of the syllabus, in the scenario style of the CCNA 200-301 v2.0 exam. It helps you know where to start studying.

It is a guide, not a prediction: it does not replace the official exam and does not guarantee a result. When you finish, we tell you which topics to strengthen and invite you to try the course's first lesson, with its hands-on lab, for free.