Prepares you for Cisco Certified Network Associate · 200-301

CCNA in 30 Days: Prepare for the 200-301 v2.0

NewAlready updated for CCNA v2.0, the version you take from February 3, 2027

Thirty days of about two hours each, from what a network is to a complete enterprise network. Each day you learn a CCNA 200-301 v2.0 topic and practice it in a lab with Cisco routers and switches that respond like real Cisco equipment: you type the same IOS commands and read the same show output you would see on the job, in enterprise topologies with deliberately planted faults to troubleshoot. The labs run in your browser, with nothing to buy or install. At the end, you build and hand over the network for a new branch office and take three practice exams in the format of the official one. If you study one hour a day, plan on about 60 sessions (8 to 10 weeks): each course day takes two sessions, and your lab progress is saved so you can pick up where you left off.

  • 📅 30 days of 2 hours (or 60 one-hour sessions)
  • 🧪 370+ hands-on tasks
  • 📝 181 practice questions (3 exams)
  • ⏱️ Self-paced · 12 months of access
  • 💻 Nothing to install · computer, tablet or phone
  • 🌎 Online, from any country · no live classes
  • 🤖 AI tutor for every lesson
  • 💳 One-time payment · no subscription

Why it’s different

Not just theory: real hands-on practice

You learn the theory and put it into practice right away, in simulations that respond like the real thing. You finish knowing how to do it, not just with notes.

370+

Hands-on tasks that check themselves

Every lesson has its lab on simulated Cisco routers and switches. You do the task and the course tells you instantly whether it’s right.

0

Programs to install

Everything runs in your browser (Chrome, Safari or Edge), on Windows or Mac, an iPad, a tablet or a phone. No equipment or licenses to buy.

12

Months of access, at your pace

Self-paced: no live classes, schedules or deadlines. Come in whenever you want, for 12 months.

1

A final project like a real job

You work inside a fictional company, with assignments, problems and a final project with no step-by-step guide.

181

Questions like the real exam

Practice exams in the format of the official exam: a timer, multiple-response questions and hands-on tasks. At the end we tell you what to review before the real thing.

24/7

An AI tutor for every lesson

Stuck on something? Message the virtual tutor on WhatsApp and it explains it another way, using that lesson’s material, whenever you study. A person from our team steps in when needed.

1

One payment, no surprise charges

Not a subscription: you pay once and we never charge you again. Card or PayPal.

✓

Verifiable certificate of completion

When you finish, you get a certificate with the HacksinCodigos seal and a code anyone can check on our site. Add it to your LinkedIn profile in one click.

30

Day money-back guarantee

Try the course for free and, if you buy it and it’s not for you, we refund what you paid if you ask within 30 days and have not completed more than a quarter of the lessons. Terms

By the end, you will be able to:

  • Build an office network with VLANs, trunks, and inter-VLAN routing, with each department on its own network.
  • Connect branch offices to headquarters using OSPF and static routes, with a backup route.
  • Give an entire site internet access with NAT and PAT, and hand out addresses with DHCP across several VLANs.
  • Secure switches and routers: port security, BPDU guard, DHCP snooping, ACLs, and SSH-only management.
  • Troubleshoot a network outage methodically: read show output, follow the packet's path, and fix one fault at a time.
  • Take the Cisco CCNA 200-301 v2.0 exam after working through simulations like the ones on the exam.

What you will learn

01

Understand how a packet travels: OSI and TCP/IP, Ethernet, copper and fiber cabling, and interface errors.

02

Subnet IPv4 with VLSM and configure IPv6, with no calculator and no fear.

03

Configure Cisco switches: VLANs, 802.1Q trunks, Rapid PVST+, EtherChannel with LACP, CDP, and LLDP.

04

Route traffic: read the routing table, static routes, OSPFv2 and OSPFv3, and redundancy with HSRP and VRRP.

05

Configure network services: DHCP, DNS, NAT and PAT, plus the basics of IPsec VPNs and wireless.

06

Protect the network with ACLs, Layer 2 security, AAA, SSH, SCP and SFTP, syslog, and SNMP.

07

Get to know automation and AI in network operations: controllers, Ansible, infrastructure as code, and agentic AI.

The Cisco Certified Network Associate 200-301 exam

The Cisco certification that proves you can install, configure, and troubleshoot an enterprise network: switching, routing, services, security, and operations with automation and AI. The 200-301 v2.0 exam can be taken starting February 3, 2027, and v1.1 remains available until February 2, 2027. This course prepares you for version 2.0.

  • Format: multiple-choice, drag-and-drop, and hands-on simulation questions, in English or Japanese; Cisco does not publish the number of questions.
  • Time: 120 minutes.
  • To pass: Cisco does not publish the passing score; the result is pass or fail.
  • Where: at a Pearson VUE test center or online from home, with remote proctoring.
  • Exam fee: not included in the course: Cisco charges it separately and it varies by country, so check the official exam page.

The course follows the 5 domains of the official exam, with the weight each one has on the exam:

Network Infrastructure and Connectivity25%
Switching and Network Access25%
IP Routing20%
Network Services and Security20%
AI, Network Operations, and Management10%

Syllabus

31 lessons. You can take a free trial of the first one.

  1. Day 1 What Is a Network: Devices, Cables, and the OSI Model The CCNA 200-301 v2.0 exam · Hosts, switches, routers, firewalls, and access points · Topologies: star, mesh, point-to-point, two-tier, three-tier, spine-leaf · Copper: UTP categories, RJ-45, T568A and T568B, Auto-MDIX · Fiber: single-mode, multimode, connectors, and transceivers · The OSI model and encapsulation Free trial
  2. Day 2 First Steps in Cisco IOS Console, cable, and terminal emulator · ROM, flash, NVRAM, and RAM; the boot process · CLI modes and their prompts · Help with ?, Tab, and abbreviations · IOS error messages · hostname, enable secret, and line passwords 🔒 With the course
  3. Day 3 Ethernet and Switches: MAC Addresses, Duplex, and Cabling Ethernet standards and the 802.3 frame · MAC addresses and the OUI · Collision domains and broadcast domains · Learning, forwarding, flooding, and filtering · show mac address-table · Autonegotiation, duplex, and speed 🔒 With the course
  4. Day 4 IPv4 and Binary Numbers The IPv4 address: 32 bits and 4 octets · Binary to decimal and decimal to binary · Subnet mask and prefix · The AND operation: the network address · Network, broadcast, and hosts · Classes A, B, C, D, and E 🔒 With the course
  5. Day 5 Subnetting I: Network, Broadcast, and Hosts Why split a network into subnets · Borrowed bits and the 2^s and 2^h − 2 formulas · Mask table from /24 to /32 · The magic number, or block size · Network, broadcast, and host range · All the subnets of a /24 🔒 With the course
  6. Day 6 Subnetting II: VLSM and Address Troubleshooting VLSM step by step · Prefix table from /22 to /32 · Block boundaries and overlap · /30 and /31 links · Short mask, long mask, and wrong gateway · Proxy ARP: when the router covers up the mistake 🔒 With the course
  7. Day 7 IPv6: Addresses, Types, and EUI-64 Why IPv6 · Hextets and hexadecimal notation · The two rules for shortening · Prefix lengths and subnets · IPv6 address types · Modified EUI-64 🔒 With the course
  8. Day 8 Interfaces and Connectivity: Ping and Traceroute Router and switch interfaces: factory defaults · description, ip address, and no shutdown · Management SVI and ip default-gateway · The four states in show ip interface brief · show interfaces and show interfaces description · LINK and LINEPROTO messages in show logging 🔒 With the course
  9. Day 9 VLANs and Access Ports What a VLAN is · VLAN ranges and vlan.dat · vlan, name, and show vlan brief · switchport mode access and switchport access vlan · interface range · Voice VLAN for IP phones 🔒 With the course
  10. Day 10 802.1Q Trunks: Native VLAN, Allowed VLANs, and DTP Why trunks are needed · The 802.1Q tag and the end of ISL · The native VLAN and native VLAN mismatches · switchport trunk allowed vlan: add, remove, except, none · show interfaces trunk · DTP: access, trunk, dynamic auto, and dynamic desirable 🔒 With the course
  11. Day 11 Inter-VLAN Routing: Router-on-a-Stick and SVIs Why VLANs need a router · Router-on-a-stick · Subinterfaces and encapsulation dot1Q · The native VLAN on the router · SVIs and ip routing · When an SVI comes up/up 🔒 With the course
  12. Day 12 Rapid PVST+: The Root Bridge, PortFast, and Spanning Tree Protections Layer 2 loops and broadcast storms · Bridge ID and the root bridge election · Cost, root port, and designated port · States and roles: 802.1D and 802.1w · Rapid PVST+ and root primary/secondary · Reading show spanning-tree 🔒 With the course
  13. Day 13 EtherChannel with LACP: Several Cables Working as One Why STP blocks parallel links · What a Port-channel is · LACP: active and passive · PAgP and mode on · Member requirements · Layer 2 configuration 🔒 With the course
  14. Day 14 CDP, LLDP, and Edge Ports: APs, Servers, and Appliances Why documentation lies · CDP: what it advertises and how to read it · LLDP and LLDP-MED · Validating a diagram with CDP and LLDP · Security: where to turn them off · Desktops, printers, and IoT 🔒 With the course
  15. Day 15 First-Half Review and Layer 2 Troubleshooting Review: OSI and TCP/IP models, cabling, and Ethernet · Review: IOS, IPv4, subnetting, and IPv6 · Review: VLANs, trunks, and DTP · Review: inter-VLAN routing · Review: Rapid PVST+, EtherChannel, CDP, and LLDP · The bottom-up troubleshooting method 🔒 With the course
  16. Day 16 The Routing Table: How a Router Decides What a router does with a packet · Connected and local routes (C and L) · How to read show ip route · Longest prefix match · Administrative distance · Metrics and equal-cost routes 🔒 With the course
  17. Day 17 IPv4 and IPv6 Static Routes: Network, Host, Default, and Floating When to use static routes · The ip route syntax · Next hop, exit interface, or both · Network routes and host routes · Default route · Floating static routes 🔒 With the course
  18. Day 18 OSPFv2 I: Neighbors, Router ID, and Point-to-Point Links Why a dynamic protocol · Link state: LSAs, LSDB, and SPF · Areas and area 0 · The router ID · Hellos and neighbor states · Adjacency requirements 🔒 With the course
  19. Day 19 OSPFv2 II: DR and BDR, Cost, and Adjacency Troubleshooting Multi-access networks and why a DR is needed · DR, BDR, and DROTHER · The 224.0.0.5 and 224.0.0.6 addresses · Election rules · A non-preemptive election · Type 1 and type 2 LSAs 🔒 With the course
  20. Day 20 OSPFv3 and Gateway Redundancy: HSRP and VRRP OSPFv3 vs. OSPFv2 · Configuring OSPFv3 on the interface · The router ID in OSPFv3 · Routes with a link-local next hop · The single-gateway problem · Virtual IP and virtual MAC 🔒 With the course
  21. Day 21 DHCPv4: Server, Relay, and Client in IOS, and How to Troubleshoot Clients What DHCP is for · DORA, ports 67 and 68, leases and renewal · DHCP pools in IOS · Excluded addresses and conflicts · Relay with ip helper-address and giaddr · The router as a DHCP client 🔒 With the course
  22. Day 22 DNS and NAT/PAT: Reaching Hosts by Name and Going Online with a Single IP How a name is resolved · A, AAAA, CNAME, MX, NS, and PTR records · nslookup and its error messages · DNS in Cisco IOS · Private addresses and why NAT exists · Inside local, inside global, outside local, and outside global 🔒 With the course
  23. Day 23 IPv4 Access Lists: Standard, Extended, Numbered, and Named What an ACL is and how it is processed · The implicit deny · Wildcards, host, and any · Standard and extended ACLs · Numbered and named ACLs · Protocols, ports, and operators 🔒 With the course
  24. Day 24 Layer 2 Security: DHCP Snooping, DAI, RA Guard, Storm Control, and Port Security Why the switch needs protection · DHCP snooping and the binding table · Option 82 and the IOS DHCP server · Dynamic ARP inspection (DAI) · RA guard for IPv6 · Storm control 🔒 With the course
  25. Day 25 Secure Device Management: SSH, AAA, SCP and SFTP, Syslog, and SNMP Telnet vs. SSH · Passwords and their types · Configuring SSH version 2 · AAA: authentication, authorization, and accounting · TACACS+ vs. RADIUS · SCP and SFTP in IOS 🔒 With the course
  26. Day 26 Wireless Networks and IPsec VPNs: Bands, RF, WPA3, and Tunnels 802.11, SSID, BSSID, and ESS · 2.4, 5, and 6 GHz bands · Channels and channel width · dBm, RSSI, and SNR · Interference · WPA2 and WPA3, Personal and Enterprise 🔒 With the course
  27. Day 27 Virtualization and Network Management Approaches: From the CLI to the Controller Type 1 and type 2 hypervisors · Virtual machines and containers · Virtual switches and port groups · Switch ports for virtualized hosts · Data, control, and management planes · Device-by-device management 🔒 With the course
  28. Day 28 Ansible and Artificial Intelligence in Network Operations Agentless Ansible: control node and SSH · Inventory, groups, and variables · The cisco.ios collection and the network_cli connection · ios_command, ios_config, and ios_facts · Ad hoc commands, playbooks, and the PLAY RECAP · Idempotence, --check, and Vault 🔒 With the course
  29. Day 29 End-to-End Troubleshooting: A Full Network with Mixed Faults The troubleshooting method · Bottom-up, top-down, divide and conquer, and follow the path · Symptoms and likely causes · Port security in err-disabled · A wrong mask · OSPF checklist 🔒 With the course
  30. Day 30 Final Review and Strategy for the CCNA 200-301 v2.0 Exam What the v2.0 exam is like · Domain 1: Network Infrastructure and Connectivity · Domain 2: Switching and Network Access · Domain 3: IP Routing · Domain 4: Network Services and Security · Domain 5: AI, Network Operations, and Management 🔒 With the course
  31. Project Final project · The Complete Liberia Branch Network The design document · Inventory with CDP · Bottom up · One change, one test · Acceptance tests · Verify before you fix 🔒 With the course

Finished all the labs? Download your certificate of completion.

Exams like the real one

With a timer, questions you can flag for review, multiple-response questions and hands-on questions on the simulated routers and switches. At the end you get a score from 100 to 900 and see which domain needs more work.

The questions are original, written from the public exam objectives. Real exam questions are confidential, and nobody serious sells them.

Who it’s for

  • People starting from scratch in networking who want their first certification to work in the field.
  • Support technicians who want to move into networking and understand what happens behind the cable.
  • People who already work with Cisco equipment and want to certify what they know with the CCNA.
  • Computer science or telecommunications students who want real hands-on practice with IOS.
  • Anyone taking the CCNA 200-301 v2.0 who wants to arrive with the simulations well practiced.

The course project

For 30 days you work as a network technician at Nube Volcán, a fictional company that is opening new offices, alongside Diego Araya, head of network infrastructure: from the first cable to connecting three offices with OSPF, getting them online, and securing the network. At the end, you open the Liberia branch on your own: a complete network built from a design document, with sixteen open items, faults left behind by the vendor, and almost no hints.

Frequently asked questions

The course prepares you for version 2.0 of the CCNA 200-301, which Cisco starts delivering on February 3, 2027. It follows Cisco's public exam topics, including the new ones: agentic AI, prompts, OSPFv3, HSRP and VRRP, DNS records, SFTP and SCP, storm control, and RA guard.

Until February 2, 2027, only v1.1 is available. Most topics are the same, but v1.1 includes some that were dropped from v2.0, such as QoS, REST and JSON, and Terraform, which this course does not cover in depth. If you can wait, take v2.0: it is the version that will remain current.

No. They run on a simulator in your browser, built for this course. The routers (ISR 2911 and ISR 4331) and switches (Catalyst 2960 and 3560) respond like real Cisco equipment: you type the same IOS commands, with abbreviations, ? help, and the same modes, and you see show output in the same format as the devices. You don't have to buy routers or switches or install anything.

Yes. Day 1 explains what a network is with simple examples, and each topic builds on the previous one, with no unexplained jargon. If you are starting from zero, we recommend a slower pace: one course day every two or three days, over about 8 to 10 weeks.

Every day has a lab with 10 to 16 tasks on an enterprise network: configuring VLANs, trunks, OSPF, NAT, or ACLs, and troubleshooting faults we planted on purpose, such as a wrong VLAN, a trunk that blocks a VLAN, or an OSPF neighbor that won't come up. Tasks are checked automatically by looking at the resulting network: the ping goes through, the neighbor reaches FULL, the PC gets its address.

No. Cisco grants the certification when you pass the official 200-301 exam, delivered by Pearson VUE at a test center or online. The course prepares you to pass it, and when you finish you receive a HacksinCodigos certificate of completion.

No. Exam questions are confidential. Ours are original, follow the public 200-301 v2.0 exam topics, and use the same formats: multiple choice, ordering, matching, and sorting questions, plus network simulations. Every answer comes with an explanation.

According to Cisco, the CCNA exam is offered in English or Japanese. This course is entirely in English: lessons, labs, review questions, and practice exams with their explanations.

Yes. You can try the course for free: part of chapter 1, the first lab tasks, and a few review questions, plus a sample exam with two network simulations. If you like it, unlock the rest with PayPal in a minute.

From any country, with PayPal: use your PayPal account or a credit or debit card, no PayPal account needed. If you are in Costa Rica, you can also pay by SINPE Móvil or bank transfer: message us on WhatsApp and we will send you the details.

With PayPal (card or PayPal account), you pay without creating an account first: the course is linked to the email you paid with, and you go straight in. With SINPE Móvil or bank transfer, we add it to your account as soon as we confirm the payment. After that, you sign in from any device with the same email, and access lasts 12 months.

Nothing to install. Everything runs in your browser (Chrome, Safari or Edge) on a Windows or Mac computer, an iPad, a tablet or a phone. For the labs, a computer or a tablet with a keyboard is more comfortable, but a phone works too.

No. The exam is sold and delivered by Cisco and its price depends on your country, so check it on the official exam page. The course prepares you to pass it.

The price is in US dollars. If your bank or PayPal converts it to your currency, the exchange rate and any fees are set by your bank or PayPal.

You have a 30-day money-back guarantee: if you ask within 30 days of paying and have not completed more than a quarter of the lessons, we refund everything you paid, by the same method.

HacksinCodigos is a Costa Rican technology company that has built websites, systems and AI agents for businesses since 2020. We write every course ourselves, with real hands-on practice, and if you get stuck we help you on WhatsApp.

Start today

Take a free trial of the course. If you like it, buy it with a card, PayPal or bank transfer and get in right away. Questions? Message us on WhatsApp.

Message us now!